Weight
Cat #
DCB546
DCB547
DCB181
DCB182
DCB183/B
DCB184/B
DCB185
DCB187
•
Connect the brown lead to the live terminal in the plug.
•
Connect the blue lead to the neutral terminal.
WARNING: No connection is to be made to the
earth terminal.
Follow the fitting instructions supplied with good quality plugs.
Recommended fuse: 13 A.
Using an Extension Cable
An extension cord should not be used unless absolutely
necessary. Use an approved extension cable suitable for
the power input of your charger (see Technical Data). The
minimum conductor size is 1 mm
is 30 m.
When using a cable reel, always unwind the cable completely.
Grounding Instructions
The charger/radio must be grounded. In the event of
malfunction or breakdown, grounding provides a path of
least resistance for electric current to reduce the risk of electric
shock. The charger/radio is equipped with a cord having an
equipment-grounding conductor and a grounding plug. The
plug must be plugged into an appropriate outlet that is properly
installed and grounded in accordance with all local codes
and ordinances.
DANGER: Improper connection of the equipment-
grounding conductor can result in a risk of electric
shock. The conductor with insulation having an outer
surface that is green with yellow stripes is the equipment-
grounding conductor. If repair or replacement of the
cord or plug is necessary, do not connect the equipment-
grounding conductor to a live terminal. Repairs shall only
be performed by a D
WALT service agent. Do not modify
e
the plug provided with the charger/radio – if it will not
fit the outlet, have a proper outlet installed by a D
repair agent.
Batteries
Weight
DCB107
V
Ah
kg
DC
18/54
6.0/2.0
1.05
270
18/54
9.0/3.0
1.25
420
18
1.5
0.35
70
18
4.0
0.61
185
18
2.0
0.40
90
18
5.0
0.62
240
18
1.3
0.35
60
18
3.0
0.48
140
; the maximum length
2
WALT
e
Chargers/Charge Times (Minutes)
DCB113
DCB115
DCB118
DCB132
140
90
60
220
140
85
35
22
22
100
60
60
50
30
30
120
75
75
30
22
22
70
45
45
For grounded, cord-connected charger/
radio rated 16A and lower and intended
for use on a nominal 230V supply circuit
The charger/radio is for use on a nominal 230 V circuit,
and has a grounding plug that looks like the plug in the
following illustration.
DCR027-BD, -QW
DCR027-GB
SAVE THESE INSTRUCTIONS
Chargers
D
WALT chargers require no adjustment and are designed to be
e
as easy as possible to operate.
Important Safety Instructions for Charger/
Radios
SAVE THESE INSTRUCTIONS: This manual contains important
safety and operating instruc tions for the your charger/radio.
•
Before using charger/radio, read all instructions and
cautionary markings on charger, battery pack, and product
using battery pack.
WARNING: Shock hazard. Do not allow any liquid to get
inside charger. Electric shock may result.
WARNING: We recommend the use of a residual current
device with a residual current rating of 30mA or less.
CAUTION: Burn hazard. To reduce the risk of injury,
charge only D
WALT rechargeable batteries. Other types of
e
batteries may burst causing personal injury and damage.
CAUTION: Children should be supervised to ensure that
they do not play with the appliance.
NOTICE: Under certain conditions, with the charger
plugged into the power supply, the exposed charging
contacts inside the charger can be shorted by foreign
EngLIsh
DCB119
90
X
140
X
22
45
60
120
30
60
75
150
22
X
45
90
DCR027-XE
23