Tabla de contenido
Idiomas disponibles
Idiomas disponibles
TraNSFer SeTuP
You can set an FTP/E-mail(SMTP) server to send the
prior/posterior alarm image saved in the camera when an
alarm is generated.
FTP
You can transfer an alarm image to an FTP server. When
the initial FTP server setting and connection are not
verified, the <No verified> messenger appears.
use Passive Mode
❖
•
Select this option when the passive mode
connection is necessary due to firewall or FTP
server setting.
FTP Server address
❖
•
Enter the IP address of an FTP server to which an
alarm image will be sent.
upload Path
❖
•
You can set the path of the FTP account to transfer
an alarm image. You can set a path by just typing
</directory name> or <directory name> in this field.
If you do not specify a path, alarm files are sent to
the root directory of the FTP account.
Port
❖
•
Although FTP server port is 21 as a default, you
can change the port number according to the FTP
server settings.
user ID
❖
•
Enter a user account ID to connect to login the FTP
server.
Password
❖
•
Enter a user account password to login the FTP
server.
Test
❖
•
To test FTP transmission, Click [Test] button.
Connect to the configured FTP server and conduct
image transmission test automatically.
When the FTP server connection and transmission
tests are complete, the <Verified> message will be
displayed.
Setup Tool
If the test fails, an error message appears. In
this case, check the FTP server status and the
configured settings once again.
SMTP
You can transfer an alarm image through Email. This
function supports SMTP Email server only. When the
initial SMTP server setting and connection are not
verified, the <Not verified> message appears.
use SSl/TlS
❖
•
Choose whether SSL/TLS secure e-mail will be
used. To use this, corresponding SMTP Server
must support SSL/TLS.
SMTP Server address
❖
•
Enter the IP address of an SMTP server to be used
to send an Email. Example) smtp.hotmail.com
Port
❖
•
Although SMTP server port is 25 as a default, you
can change the port number according to the
SMTP server settings.
( Default port number for SSL/TLS is 465.)
user ID
❖
•
Enter a user account ID to connect to connect the
SMTP server.
Password
❖
•
Enter a user account password to the SMTP
server.
e-Mail Sender
❖
•
Enter the address of the Email sender. If the sender
address is incorrect, the Email from the sender may
be classified into SPAM mail by the SMTP server
and may not be sent.
e-Mail receiver
❖
•
Enter the address of the Email recipient.
English –
Capítulos
Tabla de contenido
