Web Viewer - Samsung SNC-C7478 Manual Del Usuario

Web Viewer

lIVe VIeWer
In this section, the main GUI of the IP Smart Dome will be explained.
%
^
&
*
(
)
_
+
|
! Click this menu to enter Setup Tool.
@ Click this menu to view IP Smart Dome Camera Information.
# Live video Display.
$ Display the live screen in full screen.
% Set the video format
^ Capture : Captures the recorded image on the screen and saves it as a .jpg or .bmp file.
Print : Prints the recorded image on the screen.
Record : Saves the recorded video as a .avi video file.
& Control the Pan/Tilt of dome camera. Camera moves while the button is pressed and it stops when you release
the button.
* Zoom, Focus, and Iris controls for the camera connected to IP Smart Dome. If you click the each handle, Zoom,
Focus, and Iris are adjusted individually according to your mouse motion.
( Decide Pan/Tilt speed.
) Start OSD menu of Smart Dome Camera. In the OSD Menu, Enter/ Cancel buttons are used as enter and
cancel respectively. To move between different menu items, the Tile buttons in & is used.
M
To refer detail explanation of Camera OSD menu, see "How to use OSD Menu" (Page 20).
_ Preset / Pattern / Auto Pan / Scan Buttons
Preset: Run, Save or Delete the Preset positions memorized in the camera.
Pattern: Run the Pattern function programmed in the camera. (To create this function, use OSD Menu.)
Auto Pan: Run the Auto Pan function stored in the camera. (To create this function, use OSD Menu.)
Scan: Run the Scan function programmed in the camera. (To create this function, use OSD Menu.)
+ Reset currently activated alarm events (alarm input/output, motion detection).
(The Alarm Reset forces all Alarm Output to be OFF state and the Motion Reset will remove the icon displayed
when motion is detected.)
| Check the Listen or Speak check box for Audio.
0 – 36x IP Smart Dome Camera
! @
# $