Network Setup
HTTP webserver port
❖
•
60000
Do NOT use the default port 80, you must change this
number.
You may select any number between 80,
10000 ~ 60000.
Device port(TCP)
❖
•
60001
You may select any number between
10000 ~ 60000, 60001.
TCP Streaming port
❖
•
60002
You may select any number between
10000 ~ 60000, 60002.
uDP Streaming port
❖
•
60003
You may select any number between
10000 ~ 60000, 60003.
upload port(TCP)
❖
•
60004
You may select any number between
10000 ~ 60000, 60004
CaSe C : STaTIC(FIxeD) IP
[DeDICaTeD lINe DIreCTly TO
THe IP SMarT DOMe]
Configure your IP Smart Dome's TCP/IP properties as
follows :
IP Type
❖
•
STATIC
IP address
❖
•
A static IP address received from your ISP, such as
24.107.88.125 [Example]
You need to assign the IP Smart Dome an IP address,
just as you would assign a PC.
Subnet Mask
❖
•
Subnet mask assigned from your ISP, such as
255.255.255.240 [Example]
6 – 36x IP Smart Dome Camera
Gateway
❖
•
24.107.88.113 [Example]
Use the assigned default gateway from your ISP
DNS Server
❖
•
Use the 1st DNS Server from "Assigned IP
Addresses from My ISP"
If you did not receive any IP addresses from your ISP,
please contact them and acquire the IP address of their
DNS server.
HTTP webserver Port
❖
•
80 [default]
You may select any number between 80,
10000 ~ 60000.
Device port(TCP)
❖
•
60001
You may select any number between
10000 ~ 60000, 60001.
TCP Streaming port
❖
•
60002
You may select any number between
10000 ~ 60000, 60002.
uDP Streaming port
❖
•
60003
You may select any number between
10000 ~ 60000, 60003.
upload port(TCP)
❖
•
60004
You may select any number between
10000 ~ 60000, 60004.