Need Help - Philips SBCRP520/00 Manual Del Usuario

Instructions for use
• I cannot turn of the menu.
– Press and hold the side switch and press the 'menu' button.
• I can not enter the installation menu.
– Press the 'dual screen' and 'EPG' buttons simultaneously.
• I can not find the Picture in Picture (PIP) functions.
– Use the 'dual screen' functions to operate PIP. These commands
are the same.
• I can not search for the channels in the installation menu.
– Press and hold the side switch and press 'Volume up' button to
search forward and the 'Volume down' button to search
backwards.
• I'm missing some TV / VCR functions on the SBC RP520.
– It is possible to add some functions. See 'Adding functions'
under 'Adjustments to your remote control' .

NEED HELP?

If you have any questions about the SBC RP520, please call our
help-line for assistance! You can find the number on the last
page of this booklet.
Before you call, please read this manual carefully. You will be able
to solve most of your problems. If you don't find an answer to
your questions, make a note of your equipment in the table on
the last page of this booklet. This makes it easier and faster for
our operators to help you. Look for the model numbers in the
equipment instruction manual, or on the back of your equipment.
When calling our help-line please have your equipment close by,
so our operators can help you verify the functionality of your
remote control.
The model number of your Philips replacement remote control is:
SBC RP520
Date of purchase: _____/_____/______
day/month/year
7