Sony PDBK-102 Instrucciones De Instalación página 18

Page P1 (PDW-F30 only)
Setting item
F1: TCG (timecode generator) Sets the operation of the internal timecode generator.
F2: TC MODE (timecode
mode)
F3: RUN MODE
F4: TC/VITC
F5: DF/NDF (only when the
system frequency is 60I/
30P)
Page P2 (PDW-F30 only)
Note
Page P2 appears only when this board is installed.
18 Overview
Description
INT (internal): The count value advances from a
preset initial value, or advances consecutively
from the timecode of the last frame recorded on
the disc.
i.LINK: Synchronizes to timecode in i.LINK input
signals.
When TCG is set to "INT"
Selects whether the count value advances from a
preset initial value, or advances consecutively from the
timecode of the last frame recorded on the disc.
PRESET: Advance from a preset initial value.
REGEN (regenerate): Advance consecutively from
the timecode of the last frame recorded on the
disc.
When TCG is set to "i.LINK"
Selects whether to record external timecode from a
preset initial value, or record the external timecode
itself.
PRESET: Record external timecode.
REGEN (regenerate): Record timecode synchronized
to external timecode from a preset initial value.
When TCG is set to "INT", and TC MODE is set to
"PRESET", selects the run mode of the internal
timecode generator.
REC RUN: The timecode generator runs only during
recording.
FREE RUN: The timecode generator runs as long as
the unit is powered on.
Selects the type of timecode display in the time data
display section (TC or VITC).
Use this item to select drop-frame mode (DF) or non-
drop-frame mode (NDF).