Product Description And Intended Use; Preliminary Checks - Comunello Automation DART Manual De Instalación Y Usuario

Tabla de contenido
COVER DART
44 mm
1
58 mm
SWIFT
TACT
2
COVER DART / COVER DART SLIM
4
https://bit.ly/comunello-dart-cover-ce
91300430 - Rev.00 | 23-07-2020
COVER DART SLIM
DART COVER SLIM
DART INSERT
DART BUS INSERT
3
not included
5
LINK CE:
For the digital version with other
available languages use the QR code
https://bit.ly/comunello-dart-cover-ce
GCVRDSSTD0S00
LINK CE:
https://bit.ly/comunello-dart-cover-slim-ce
GDARTINSN0B00
LINK CE:
https://bit.ly/comunello-dart-insert-ce
29,5 mm
44 mm
GDARTINSN2B00
LINK CE:
https://bit.ly/comunello-dart-bus-insert-ce
TX
RX
LED 1
Thank you for choosing a COMUNELLO AUTOMATION product.
This manual provides all the detailed information required for the knowledge
and correct use of the equipment. It must be read carefully at the time of
purchase and consulted if there are any doubts regarding its use or when
maintenance is required.
The manufacturer reserves the right to make any modifications to the item and
to this document without prior notice.
WARNINGS
Please read this manual carefully before beginning installation and carry out
the procedures as specified by the manufacturer.
This installation manual is only intended for professional personnel.
Anything not expressly included in these instructions is prohibited.

PRODUCT DESCRIPTION AND INTENDED USE

DART and DART SLIM covers are accessories for the DART and DART SLIM
photocells respectively. These are aluminium covers designed to offer maxi-
mum impact resistance and protect the photocell from vandalism or criminal
activity.

PRELIMINARY CHECKS

• Check that the item inside the packaging is intact and in good condition.
• Check that there is sufficient space for correct installation and securing of
the covers.
INSTALLATION
• Use the cover itself as a template by placing it as shown in Figure 3 corre-
sponding to the photocells and marking the holes before drilling the holes.
• Proceed as shown in Figure 4 using appropriate anchoring systems (not in-
cluded) that depend on the type of substrate.
TESTING
Test the correct operation of the photocells after installing the covers, Figure 5.
DISPOSAL
A number of components of the item can be recycled while others,
such as electronic components, must be disposed of according to the
regulations in force in the are of installation.
A number of components may contain pollutants that must not be released
into the environment.
Tabla de contenido
loading

Este manual también es adecuado para:

Dart slimGcvrdtstd0s00Gcvrdsstd0s00

Tabla de contenido