Assembling The Product; Connecting The Product - Erbe 20195-132 Manual Del Usuario

OBJ_DOKU-27191-012.fm Seite 24 Mittwoch, 2. Dezember 2020 12:17 12
6.3

Assembling the product

CAUTION! Never press the instrument jaws together by hand to
prevent damaging the instrument.
1. To close the instrument jaws, hold the insert on the joint
sleeve (1) and pull on the rod (2).
2. Slide the insert into the shaft tube.
3. Screw the insert onto the joint sleeve (2) as far is it goes.
4. Press the rear release button (1) on the handle and slide the
shaft tube as far as it goes and latch into the handle.
6.4

Connecting the product

1. Connect the handle to the associated connection cable.
2. Connect the product to the bipolar socket.
24