Control Panel; Temperature Indicator - Zanussi ZJB 9476 Libro De Instrucciones

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

Use of the refrigerator

Control Panel

J
ON/OFF light
K
Fridge button ON/OFF
L
Temperature setting button (warmest)
M

Temperature indicator

J. Light ON/OFF
K. Button ON/OFF
ON:
Press the button (K). The pilot light (J)
switches on.
OFF: Keep press the button (K) until the pilot light (J)
and the temperautre indicator switched off.
L - N. Temperature setting buttons
The temperature can be adjusted between +2°C and
+8°C.
By pressing the button (L or N), the current
temperature setting flashes on the indicator. It is
possible to modify the setting temperature only with
flashed indicator. To set a warmer temperature, press
button (L). To set a colder temperature, press button
(N). The indicator display the newly selected
temperature for a few seconds and then shows again
the inside compartment temperature.
The newly selected-temperature must be reached
after 24 hours.
Attention!
During the stability period by the first starting the
temperature displayed can not correspond to the
setting temperature. During this time it is possible
that the temperature displayed is lower than the
setting temperature.
M. Temperature indicator
During normal functioning the indicator shows the
temperature inside the fridge.
40
J K
L
M
N
Temperature setting button (coldest)
O
Auto fresh light
P
Auto fresh button
Attention!
Difference between the temperature displayed and
temperature setting is normal. Especially when:
-
a new setting has recently been selected
-
the door has been left open for a long time
-
warm food has been placed in the compartment
O. Auto fresh pilot light
P. Auto fresh button
The maximum performance is obtained by setting
the Auto fresh function. It's recommended when
loading large quantities of food.
Press the Auto fresh button (P).The relevant pilot
light (O) switches on.
The internal temperature goes down to +2°C.
After about 6 hours the Auto fresh function switches
off automatically.
Operation
Insert the plug in the power socket. Press the button
ON/OFF (K). The fridge is switched on.
The fridge is pre-set to run at +5°C. This temperature
will be reached in a few hours.
O
P
N
Tabla de contenido
loading

Tabla de contenido