Ventilation Requirements; Door Reversibility; Control Panel - Zanussi ZNLN18FS1 Manual De Instrucciones

Ocultar thumbs

Contenido

Tabla de contenido

Idiomas disponibles

free circulation of the cooling air, plus the space

necessary to allow door opening to the minimum

angle permitting removal of all internal equipment

* including the width of the bottom hinges (8 mm)

LOCATION

To ensure appliance's best functionality, you should

not install the appliance in the nearby of the heat

source (oven, stoves, radiators, cookers or hobs) or

in a place with direct sunlight. Make sure that air

can circulate freely around the back of the cabinet.

This appliance should be installed in a dry, well

ventilated indoor position.

This appliance is intended to be used at ambient

temperature ranging from 10°C to 43°C.

The correct operation of the appliance

can only be guaranteed within the

specified temperature range.

If you have any doubts regarding

where to install the appliance, please

turn to the vendor, to our customer

service or to the nearest Authorised

Service Centre.

It must be possible to disconnect the

appliance from the mains power

supply. The plug must therefore be

easily accessible after installation.

ELECTRICAL CONNECTION

•

Before plugging in, ensure that the voltage and

frequency shown on the rating plate correspond

to your domestic power supply.

•

The appliance must be earthed. The power

supply cable plug is provided with a contact for

CONTROL PANEL

this purpose. If the domestic power supply

socket is not earthed, connect the appliance to

a separate earth in compliance with current

regulations, consulting a qualified electrician.

•

The manufacturer declines all responsibility if

the above safety precautions are not observed.

•

This appliance complies with the E.E.C.

Directives.