Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Remote
control
Safety
features
1.
This heater includes an audible alarm to warn that parts of the heater are getting
excessively hot. If the alarm sounds, immediately turn the heater off and inspect for
any objects on or adjacent to the heater that may cause high temperature.
DO NOT
OPERATE THE HEATER WITH THE ALARM SOUNDING.
2.
A thermal overload protector is built in to prevent overheating.
3.
When an overheat temperature is reached, the heater will be automatically shut off.
It can only resume operation when the user resets the unit. (See
TION
below)
Reset instruction
1.
Unplug the heater and wait 10 minutes for the unit to cool down.
2.
After the 10 minutes, plug the unit in again and operate normally.
Trouble shooting tips
If your heater shuts
safety features may have activated to prevent overheating.
1.
Be sure the power cord is plugged into a working electrical outlet.
2.
Check your thermostat setting. The heater may be off because it has reached the
desired temperature setting.
Maintenance
WARNING: ALWAYS UNPLUG THE CORD BEFORE CLEANING, MOVING OR
SERVICING.
DO NOT IMMERSE HEATER IN WATER!
1)
Plug the heater into outlet and open the power switch on the
base.
2) Press the
ON/OFF button will start the
3) The
OSC., TIEMPO and MODO buttons function in the exact
same manner as listed in the OPERATION
4) The TEMP.
buttons (+,-)
exact same as the
5)
The remote control is powered by two AAA batteries. There is a
cover on the back of the remote control that can be removed
for replacement of the batteries as required.
6) Do not mix old and new batteries, or batteries of different spe-
cifications.
7) The battery must be removed from the appliance before it is
scrapped; it is to be disposed of safety.
off unexpectedly or fails to operate, one of the above-mentioned
are for the thermostat function in the
Thermostat knob.
–16–
heater.
instructions above.
RESET
INSTRUC-
E
N
G
L
I
S
H
Tabla de contenido
