E. The function of automatic air flap
F. A buzzer can send out a prompt tone to indicate the activated function.
2) The work flow of the warm-air blower
A. Switch on the power supply switch on the side of the machine, and the buzzer
will send out a prompt tone of "beep". The power supply indicator will be illumina-
ted. Now the machine is under the standby mode.
B. Press the "ON" button, and the blower indicator will be illuminated, indicating
that the blower has started to work. The air flap will automatically open and send
out cold air.
C. Press the "POWER" button, and the machine can be switched between lower
power heating and high power heating. Accordingly, the low power indicator and the
high power indicator will be illuminated.
D. Press the "TIMER" button and preset the time to 1h to 15h. Every time you press
the "TIMER" button, the preset time will be incremented by 1h, and the correspon-
ding indicator will be illuminated. When the machine is working, the current preset
time will be displayed.
E. Press the "TURNING" button, and the air flap will automatically move upwards
and downwards. The corresponding indicators will be illuminated.
F. Press the "OFF" button to stop the machine while it is running. The power supply
indicator is kept illuminated, and the blower indicator glittering, until it automatically
goes out after 30 seconds. All other indicators also go out, and the machine will be
switched to the standby mode.
Recycling of electrical and
The symbol on the
treated as household waste. Instead it shall be handed over to the applicable collection
point for the recycling of electrical and electronic equipment. By ensuring this product is
disposed of correctly, you will help prevent potential negative consequences
for the environment and human health, which could otherwise be caused by
inappropriate waste handling of this product. For more detailed information
about recycling of this product , please contact your local city office, your
household waste disposal service or the shop where you purchased the pro-
duct. These instructions are only valid in the EU member states.
turning is available.
electronic equipment
product or in its packing indicates that this product may not be
–15–
E
N
G
L
I
S
H