Description Of Functions - Tintometer Lovibond SD 315 Oxi Instrucciones

4.1.2 Description of functions

Menu Parameter
Set parameter: Setting of the measuring parameter
40
Values Meaning
Calibration: Selection of the calibration medium
Air Oxygen sensor is calibrated in air
or in gas (factory setting)
AqUA Oxygen sensor is calibrated in water
Calibration:
Selection of the number of calibration points
1 pt 1-point calibration in air (Air)
or air-saturated water (AqUA)
2 pt / 3 pt 2- or 3-point calibration in air (Air),
air-saturated water (AqUA),
oxygen-saturated water,
or nitrogen/zero solution
Calibration:
Time interval for calibration reminder
1 ... 365 Calibration reminder (in days)
oFF No calibration reminder
Selection of the O concentration
2
mg/litre O concentration in milligrammes
2
per litre
ppm O concentration in parts per million
2
Selection of the temperature unit
°C Temperature information
in degrees Celsius
°F Temperature information
in degrees Fahrenheit
Selection of the secondary display
(t = temperature, P = absolute pressure)
t Secondary display shows temperature
(°C / °F)
P Secondary display shows absolute
pressure (hPa)
P, t Secondary display shows absolute
pressure and temperature alternately
Setting of the salinity (salt compensation)
oFF No salinity correction
0.1 ... 70.0 Salinity correction of the oxygen
measurement, Unit: ‰ = PSU
*
*
*
*
SD_315_DO_1 06/2020