Selection Of The Display Range - Tintometer Lovibond SD 325 Con Instrucciones

5.6 Selection of the display range

In the factory setting, the auto range function is set for the display range (<SEt PArA>: rAnG
= Auto). With this setting, the measurement values are automatically detected and set with
the optimum resolution.
To use logger and interface mode, the auto-range function must be disabled
!
and the display range (resolution) must be defined.
Conductivity display ranges (Con)
Conductivity is specified in the instrument in µS/cm or mS/cm.
Range
CELL
– rAnG
0.01 0.000–5.000
µS/cm
0.1 0.00–50.00
µS/cm
1 0.0–500.0
µS/cm
10 0–5,000
µS/cm
Display ranges of specific resistance (Res)
The specific resistance is the reciprocal value of the conductivity and is indicated in
the instrument in kΩ*cm or MΩ*cm.
Range
CELL
– rAnG
0.01 0.10–50.00
kOhm*cm
0.1 0.010–5.000
kOhm*cm
1 0.0010–
0.5000
kOhm*cm
10 ---
SD_325_Con_1 06/2020
1 2
0.00 - 50.00
µS/cm
0.0 - 500.0
µS/cm
0–5,000
µS/cm
0.00–50.00
mS/cm
1 2
0.1–500.0
kOhm*cm
0.01–50.00
kOhm*cm
0.001–5.000
kOhm*cm
0.0001–
0.5000
kOhm*cm
3
0.0 - 500.0 0–5,000
µS/cm µS/cm
0–5,000 0.00–50.00
µS/cm mS/cm
0.00–50.00 0.0–500.0
mS/cm mS/cm
0.0–500.0 0–1,000
mS/cm mS/cm
3 4
0.000–5.000 0.000–50.00
MOhm*cm MOhm*cm
0.0–500.0 0.000–5.000
kOhm*cm MOhm*cm
0.00–50.00 0.0–500.0
kOhm*cm kOhm*cm
0.000–5.000 0.00–50.00
kOhm*cm kOhm*cm
4 5
0.00–50.00
mS/cm
0.0–500.0
mS/cm
0–1,000
mS/cm
---
57