Doro PhoneEasy record 327cr Manual De Instrucciones página 13

Connection
1.
Connect the telephone cord to a network wall socket and to the
T socket on the back of the telephone.
2.
Connect the mains adapter to the mains power socket and to
the Y socket on the back of the telephone.
3.
Connect the spiral cord to the handset and to the q socket
on the telephone's left side.
4.
You will hear a click when the modular plug is correctly in place.
5.
Set correct
6.
Lift the handset and listen for the dial tone.
Ring signal
There is a ring signal volume switch
telephone.
Memories
Saving speed dial numbers
1.
Make sure that the R / P switch on the back of the telephone
is set to P .
2.
Lift the handset and press P (
3.
Enter the �hone number (u� to 16 digits) using the ��ey�ad.
Press P (
4.
Select the memory position by pressing the corresponding button.
5.
Replace the handset. The number has now been saved.
Remember to return the R / P switch on the back of the
telephone to the R position when all the telephone numbers have
been saved.
Press if you want a pause in the telephone number.
Settings
Flash
time to 100 (see Technical Information).
).
R
English
on the right side of the
) (do not �ait for the dialling tone).
R
13