Repeating Track(S) (Repeat Playback); Timer Playback - Teac MD-5 Manual Del Usuario

Useful Tips for Playback
Buttons used on this page
Repeating Track(s)
(Repeat Playback)
All or one of the tracks, or a specified
portion (A-B) of an MD can be played
repeatedly. Program playback and Shuffle
playback can also be repeated.
ª To repeat all MD tracks
(All-track repeat)
1. In the Stop mode, press the [PLAY
MODE] button to select one of the
following repeat play modes.
Play Mode Repeat
CONTINUE Normal repeat
SHUFFLE MODE Shuffle repeat
PGM MODE Program repeat
2. Press the [REPEAT] button on the remote
control unit once to display "REPEAT
ALL".
... "
" lights up.
3. Press the [ ¥ PLAY] button.
The tracks will be played repeatedly in
the specified mode.
... To release REPEAT playback and resume
normal playback, press the [REPEAT]
button repeatedly until "REPEAT OFF"
appears.
... The Repeat Playback mode will not be
canceled even when the power is turned
off.
ª To repeat a single track
(Single-track repeat)
1. During playback in the "CONTINUE
MODE", press the [REPEAT] button on the
remote control unit twice.
... "REPEAT 1" appears ("
" " light up).
2. Press the [ ¥ PLAY] button. The current
track will be repeated.
3. The track to be repeated can be
changed by turning the [ µ
dial or by pressing the [ µ
buttons or numeric buttons (1 to 9, 0, +10)
on the remote control unit.
... Single-track repeat is unavailable in the
"SHUFFLE MODE" or "PGM MODE".
ª To repeat a section within a track
(A-B repeat)
A specified portion (between A and B) of a
track can be played repeatedly.
1. During playback, press the [A-B] button
on the remote control ("REPEAT A–" is
displayed, and " " lights up,
" " blinks) at the starting point (A) of
the portion you want to repeat.
2. Press the [A-B] button again ("REPEAT A-
B" is displayed, and "
" " light steadily) at the ending point
(B). The portion (A-B) will be played
repeatedly.
... A-B repeat playback of portions
extending over more than one track is
not possible during programmed
playback or shuffle playback.
... To cancel Repeat playback and resume
normal playback, press the [A-B] button
or [REPEAT] button again.
("REPEAT OFF" is displayed.)
... Press the [
ª STOP] button to erase the
specified portion (between A-B).
– 14 –

Timer Playback

By connecting this deck with a timer
(commercially available), playback can be
started at a specified time.
" and
1. Insert a pre-recorded MD and set the
[TIMER] switch to [PLAY].
2. Select the amplifier's input which allows
this deck to play back.
... Timer playback is available when
TRACK ≤ ]
"SHUFFLE MODE", "PGM MODE", "ALL
SKIP ≤ ]
REPEAT" or "REPEAT SINGLE" playback is
selected.
3. Set the timer to the desired start time
and turn off the power.
When the set time comes, each
component will be turned on and
playback will start.
... Set the [TIMER] switch back to [OFF]
after timer playback.
" and