Connecting Power Adapters - Tripp-Lite CST16AC Manual Del Propietário

4. Setup

4.3 Connecting Power Adapters

When installing power adapters, always start from the bottom of the charging station tower. Any unused
device slots closer to the top of the unit will allow for easier future expansion of installed devices.
Installing Power Adapter Shelves
1
The included power adapter shelves
provide secure mounting for the
devices' AC power supplies. Starting
at the bottom of unit in the order as
shown,
2 Insert the power adapter shelf tabs into
the slots located on the tower's rear
panel. Repeat as needed.
*CST16AC 16-device slot model shown.
CST20AC contains 20 power adapter shelves
and slots.
Installing the Device's AC Power Supply
1
Place the device's AC power supply on the power adapter shelf and secure with the thumbscrew
2 Then, plug the device's AC power supply into the power distribution unit
3
Run the AC power connector through the corresponding power connector bushing
station tower unit. Repeat for each additional device.
1
1
A
2
*
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
B
B
6
2
A .
(starting with the lowermost outlet).
C located on the side of the charging
3
C