Introduction And Main Features; What The Digi 2 Console Is Not; What The Digi 2 Console Is; How To Connect The Digi 2 Console - Cressi DIGI 2 Manual De Instrucciones

EN
26
INTRODUCTION
AND MAIN FEATURES
Congratulations,
Cressi Sub S.p.A. congratulates you on your purchase of a DIGI 2
console, a complete and sophisticated device designed in our Research
and Design Department and manufactured in Cressi Sub S.p.A.
factories in Italy to guarantee sporting and recreational divers the
maximum efficiency and reliability in the measurement and display of
the main parameters needed to conduct a dive in complete safety.
 WARNING!
Cressi Sub S.p.A. recommends that the DIGI 2
console be used only by those who have successfully completed
a diving course and who have obtained the required diving license
at the end of said course

What the DIGI 2 console is not:

 WARNING!
In order to prevent improper use, it absolutely
imperative to understand that the DIGI 2 console is not a dive
computer.
 WARNING!
The DIGI 2 console makes no calculations, nor
does it display any information regarding: decompression time
and/or stops; no-decompression limits; ascent rate alarms; no-fly
and/or post-dive desaturation times.
P80-DIGI 2.indb 26

What the DIGI 2 console is:

The DIGI 2 console is a modern, DIGITAL, interpretation of the
classic two-instrument analog console. It features a pressure gauge,
depth gauge, and digital timer, all highly precise and certified, that
guarantee accurate monitoring of tank pressure, depth, dive time, and
other information helpful to the diver.

HOW TO CONNECT THE DIGI 2 CONSOLE

 WARNING!
Whenever assembling or disassembling the
regulator, make sure that it is not mounted to the tank valve. In
the event that it is, make sure that the first stage/regulator unit is
completely depressurized.
First, unscrew and remove the cap marked HP (7/16 UNF" thread)
from the unpressurized 1st stage. Then, after checking that both the
regulator housing and the hose O-ring are clean, manually screw the
instrument's HP hose to the regulator 1st stage, and then tighten with
an appropriate size wrench or crescent wrench, taking care not to
exceed torque of 8 Nm.
 I MPORTANT!
If you have any trouble connecting or
assembling the DIGI 2 console, this operation must be performed
by a qualified Cressi Sub S.p.A. technician. You can also contact
your trusted merchant, so long as they are certified and authorized
to work on Cressi Sub S.p.A. equipment.
13/06/19 14:01