Safety Instructions - Berner 186414 Instrucciones De Uso

MulTiFunCTiOn TESTER
FOR VEHiClE ElECTRiCAl SySTEMS
Content
1. Safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
2. Commissioning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
3. Sounding device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
4. Fuse . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
5. Brief description of the modes . . . . . . . . . . . . . . . . . . . . . . . . . 11
6. Device functions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
6.1 Mode 1: Main mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
A: Measurement of voltage and earth . . . . . . . . . . . . . . . . . . 12
B: Trouble shooting of electrical components. . . . . . . . . . . . . . . 12
C: Continuity test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
D: Activating electrical components . . . . . . . . . . . . . . . . . . . 13
E: Function test of disassembled electrical components . . . . . . . . . 13
6.2 Mode 2: Voltage minimum . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
6.3 Mode 3: Voltage maximum . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
6.4 Mode 4: Peak-to-peak measurement . . . . . . . . . . . . . . . . . . . . . . 14
6.5 Mode 5: Threshold value setting . . . . . . . . . . . . . . . . . . . . . . . . 14
7. Technical specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
8. Scope of delivery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

1. Safety instructions

working on electrical systems requires special skills. Therefore, the device
should only be operated by trained, specialised personnel. The notices and
explanations must be followed because otherwise damages to the device or
vehicle can result.
when activating the rocker switch, the battery current is live on the battery
voltage or earth. upon contact with the chassis or electrical components,
there can be spark formation. Therefore, the Power Probe cannot be used
near easily flammable substances.
The Power Probe cannot be connected to a 115/230 V mains voltage.
it is only intended for use up to 48 V.
MAnuAl
english
Page
9