Tripp-Lite B006-HD2UA2 Guia De Inicio Rapido página 6

Installation
2 Plug your USB keyboard and USB mouse into the USB
console ports from the Console Ports Section located on
the unit's rear panel.
3
Plug your HDMI monitors into the HDMI console ports from
the Console Ports Section located on the unit's rear panel
and power on the monitors.
4
Plug your microphone and speakers into the Audio Jacks
located on the unit's front panel. Audio cables are required
to connect to the CPU for this connection to work.
5 Plug your secondary microphone and speakers into the
Audio Jacks located on the unit's rear panel.
Note: The microphone and speakers plugged into the front panel
have priority over those plugged into these jacks.
6
With a user-supplied HDMI cable, plug the HDMI connector
into any available HDMI port on the KVM Ports Section
of the switch (CPU1, CPU2, etc.). Then, plug the USB
3.0 cable, microphone cable and speaker cable into their
corresponding ports. With a second user-supplied HDMI
cable, plug the HDMI connector into the HDMI port in the
same KVM Ports Section of the switch.
Note: Verify that all the connectors are in the same KVM Ports
Section (all in CPU1, all in CPU2, etc.).
6