Berner SCOTT Sari Instrucciones Para El Uso página 38

5.8 Storage
•
Storage protected from direct sunlight, at -10...+50 °C and relative humidity (RH) under 75 %
(sealed fi lters RH max. 95 %). A properly stored, unused mask stays in good condition for a
long storage period.
•
The components should not be more than 10 years old.
•
Before use, the mask must undergo a function test, see Table.
•
After use, an opened fi lter must be sealed tightly if it is to be reused, but it must be replaced
within 6 months at the latest.
•
Masks (without fi lters) are coarse waste. A very contaminated mask as well as used fi lters
are special refuse and shall be disposed of according to the fi ltered substances (gases or
particles).
Component Work to be done
Mask, Cleaning
complete Disinfection
Test for function and leak-tightness/Pro-Tester
Pre-use check done by the user, according to
point 4
Replace visor, head harness and other parts
Valve discs Check
(11, 12, 18) Replace
Check tightness of exh. valve disc/Pro-Tester
Connector of Check inhalation valve seat (part 9)
mask (7)
Speech Check
diaphragm Replace
( )
13, 14
*) when needed
* * * * * * * *
Intervals
Before After Every
use use year
■ ■
■ ■
■ ■ *) ■
■
■ *)
■ ■
■ *)
■ ■
■ ■
■ ■
37
Every 6
years
■
■