How To Use; Cleaner Description; Polarized Plug; On-Off Switch - Hoover TurboPOWER WindTunnel U5415-900 Manual Del Usuario

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

2. How to use

Cleaner description

2-1
1
2
3
6
17
19
13
12

Polarized plug

To reduce the risk of electric shock,
this appliance has a polarized plug
(one blade is wider than the other).
This plug will fit in a polarized outlet
only one way. If the plug does not
fit fully in the outlet, reverse the
plug. If it still does not fit, contact a
qualified electrician to install the
proper outlet. Do not change the
plug in any way.
2
18
4
5
6
2
14
7
9
10
8
11
2-2
A

ON-OFF switch

Plug cord into electrical outlet.
To turn cleaner ON, push switch (A)
toward front of cleaner.
To turn cleaner OFF, push switch
toward back of cleaner.
The assembled cleaner will
look like the drawing.
1. Handle
2. Cord hooks: wrap cord
around hooks for storage.
The top hook can be
3
rotated right or left for
easy cord release
3. Hose
4. ON/OFF switch: located
on left rear corner of
cleaner body
5. Carrying handle
6. Bag door
7. Stair cleaning handle:
located below lower edge
of bag door
8. Handle release lever:
step on lever to lower
handle to operating or
low positions
9. Headlight
10. Nozzle control knob:
slide knob to correct set-
ting for height of carpet
being cleaned
11. Furniture guard: helps
prevent cleaner from
marking furniture
12. Edge groomers
13. Wands
14. Check bag indicator
15. Final filter exhaust
16. Dusting brush
17. Furniture nozzle
18. Hose hook
19. Crevice wand: stores
inside of extension wand
Operate cleaner only at volt-
age specified on data plate
on bottom of cleaner.
This cleaner is intended for
household use.
2-3
B
Cord clip
To help keep the cord out of the way
while vacuuming, position cord
down into cord clip (B) located
between top cord hook and handle.
Continued
5
Tabla de contenido
loading

Este manual también es adecuado para:

Turbopower windtunnel u5416-900

Tabla de contenido