Tabla de contenido
Monthly
•
All nuts and bolts on this product must be
checked and tightened to avoid unnecessary
failures
•
Oil the swing-away parts. We recommend you
use a professional lubricant system
Annually
EN
•
Inspect the frame for cracks or signs for worn-
out parts and carry out annual service. Never
use a product which appears to be substandard
or faulty
WHEELS
Wheel axles: The axles should be kept free of dirt.
Clean as frequently as necessary.
Ball bearings: The ball bearings require no
maintenance.
Handrims: If a handrim should be damaged in such
a way that it could lead to hand injury, it should be
replaced.
22" tires: Check the air pressure (recommended: 55
PSI/3,8 bar/380 kPa) and tread at a regular basis.
For instance by your local bicycle engineer.
12½" tires: Check the air pressure (recommended:
35 PSI/2,5 bar/240 kPa) and tread at a regular
basis. For instance by your local bicycle engineer.
Brakes
The function of the brakes is dependent upon tire
pressure. Caked on dirt can have a negative effect
on the brake mechanism. The brakes should be
checked at least once a month.
For safety routinely check to make sure the distance
between the wheel and the wheel lock block is: 8-10
mm. The brakes should not be activated when the
frame is stored as this could result in a flat spot
in the solid inner of the tyre. If drum brakes are
mounted, the cables have to be adjusted, to ensure
the brakes are working properly. Make sure the
wheels can not be turned around when the brakes
are activated.
Warewashing machine
This product can be washed at 60° using a mild
detergent for 10 minutes in a washing machine
designed for medical devices. Use the machine's
drying function to dry the product.
Disinfection
The product without accessories and cushion can
be disinfected with a 70% disinfectant IPA solution.
It is recommended to wipe off any residue and dirt
from the product, using a cloth with warm water and
a mild detergent/soap without chlorine and let it dry
before disinfection.
Service interval
A detailed inspection of the product must be made
every 12 months (every 6 months for heavy users)
and every time the product is reissued for use. The
inspection should be carried out by a technically
competent person who has been trained in the use
of the product.
The lifetime of this product in normal use is 5 years
if all maintenance and servicing is carried out in
accordance with the manufacturer's instructions
and demonstrably recorded.
Service Check List:
Check and adjust the following functions as per their
intended use. Repair or replace any damaged or
worn-out parts. Please check the:
•
Seat plane adjustment. The seat plane
is adjustable and stays in position after
adjustment.
•
If a seat adapter is mounted, check that the
red handle for locking works and that the safety
lock "clicks into position when placing a seat
into the adapter
•
Wheels are moving freely and that all wheel
locks/brakes are easily activated. Adjust if
required
•
Quick release wheels are removable/
replaceable
•
Anti-tips can be fixed in working and resting
position
•
Tire pressure
•
Spoke guards is without cracks and secured
to the wheel with the clips mounted on each
guard
•
The Pushbrace can be folded over the frame
•
Before storage: Always deactivate wheel locks/
brakes
•
Nuts and bolts on the product are tightened
•
Oil the swing-away parts
•
Product for cracks or signs for worn-out parts
•
All labels on the product are intact
38
support.R82.org
Tabla de contenido
