Idiomas disponibles
Idiomas disponibles
CD, if you did not receive a CD with your unit the User Manual can be found at
www.zoomtel.com/5792manual
7 What you do next depends on whether you know your VPI/VCI, Encapsulation and Connection
Type. Your service provider may have given you these values, or may have put them on a
small label on the bottom of your modem/router. If you are replacing an existing modem, you
may be able to get them by logging into your existing modem and looking at the setup page. If
you know these values, go to Configuring your ADSL Modem/Router when you know your
VPI/VCI, Encapsulation and Connection Type. If you do not know these values, go to
Configuring your ADSL Modem/Router when you do not know your VPI/VCI,
Encapsulation and Connection Type.
Configuring your ADSL Modem/Router when you know your VPI/VCI,
Encapsulation and Connection Type
1 Follow the steps in this Quick Start's Logging into the Configuration Manager.
2 Enter the VPI/VCI, Encapsulation, and Connection Type on the home page. If your
Connection Type is PPPoE or PPPoA you will also need to enter your username and
password. Sometimes the service provider puts these on a small label on the bottom of the
unit.
3 Click OK to save your settings.
4 Now check that your installation worked by opening the computer's Web browser and connect
to a web site. If you cannot connect to the Web, please refer to the Troubleshooting Tips in
the User Manual on your CD, if you did not receive a CD with your unit the User Manual can
be found at www.zoomtel.com/5792manual
Congratulations! Your setup is now complete for a single PC. Please go to Completing your
Installation.
Configuring your ADSL Modem/Router when you do not know your VPI/VCI,
Encapsulation and Connection Type
1 Follow the steps in this Quick Start's Logging into the Configuration Manager.
2 On the home page in the Country drop down list please select your country.
3 In the ISP drop down list, please select your ISP. If your ISP has more than one setting and
you are unsure what setting your ISP uses, start with the first setting. You may have to try
each setting for your ISP to find the correct one.
Important Information for CenturyLink Customers: When selecting your ISP, you should
select CenturyLink if you were in an original CenturyTel territory, CenturyLink (Qwest) if you
are in an original Qwest territory, and Centurylink (Embarq) if you are in an original
Embarq/Sprint territory.
In case you don't know which of these territories you're in, the table below lists the states for
each territory. Note that some states are listed for more than one territory. For those states
you may need to try each of the settings more than one territory. If you are still unsure of what
settings to use, contact CenturyLink customer support and ask for the correct settings for you.
