General Information; Product Description - Stiebel Eltron SFR 10 Instalación

contentS | InStallatIon

General information

1. General information �����������������������������������������8
1.1 Safety instructions ����������������������������������������������� 8
1.2 Other symbols in this documentation ����������������������� 8
1.3 Units of measurement ������������������������������������������ 8
2. Safety ����������������������������������������������������������8
2.1 Intended use ������������������������������������������������������ 8
2.2 Instructions, standards and regulations �������������������� 8
3.

Product description ������������������������������������������8

4. Installation ����������������������������������������������������9
4.1 Trimming ���������������������������������������������������������� 9
4.2 Preparing the pipe ends ���������������������������������������� 9
4.3 Connecting ������������������������������������������������������� 10
4.4 Securing ���������������������������������������������������������� 10
4.5 Tightness test ���������������������������������������������������� 10
5. Specification ������������������������������������������������ 10
warranty
enVironment and recyclinG
1. General information
This document is for contractors.
Note
Read these instructions carefully before using the appli-
ance and retain them for future reference.
Pass on the instructions to a new user if required.
1.1 safety instructions
1.1.1 structure of safety instructions
KEYWORD Type of risk
!
Here, possible consequences are listed that may result
from failure to observe the safety instructions.
f Steps to prevent the risk are listed. f
1.1.2 symbols, type of risk
Symbol type of risk
Injury
!
1.1.3 Keywords
KeyWoRD Meaning
DANGER Failure to observe this information will result in serious
injury or death.
WARNING Failure to observe this information may result in serious
injury or death.
CAUTION Failure to observe this information may result in non-seri-
ous or minor injury.
8 | SFR
1.2 other symbols in this documentation
Note
General information is identified by the symbol shown
on the left.
f Read these texts carefully. f
Symbol Meaning
Material damage
!
(Appliance and consequential losses, environmental pol-
lution)
f This symbol indicates that you have to do something. The ac- f
tion you need to take is described step by step.
1.3 units of measurement
Note
All measurements are given in mm unless stated oth-
erwise.
2. safety
Only qualified contractors should carry out installation, mainte-
nance and repair.
2.1 intended use
The product serves as pipework connection between the solar
compact installation and the collector, and between the cylinder
and the collector. The product is designed for operation with the
H-30 L or H-30 LS heat transfer medium.
Any other use beyond that described shall be deemed inappro-
priate. Observation of these instructions is also part of the correct
use of this appliance.
Any changes or modifications to the product void any warranty.
2.2 instructions, standards and regulations
Note
Observe all applicable national and regional regulations
and instructions.
3. Product description
The product is a flexible, pre-insulated twin pipe bound with PET
braid for protection. You can install the product without brazing,
welding or the use of special tools. A three-core sensor lead is
integrated into the film sleeve in the flexible solar pipe.
The flow and return of the flexible solar pipe can be separated.
The product is suitable for indoor and outdoor installation.
The fixing clips included in the standard delivery enable you to fix
the insulated flexible solar pipe to the wall or the ceiling.
www.stiebel-eltron.com