Elvox Giotto Serie Manual Para El Conexionado Y El Uso página 5

Vídeo-portero de la para dos hilos elvox
Ocultar thumbs Ver también para Giotto Serie:
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 14
GB
DESCRIPTION
Type 6309 is an interphone in the Giotto series with 4" B/W screen for
ELVOX 2-WIRE video door entry systems. It is supplied as standard with
3 pushbuttons, one for lock release, one for self-start of the monitor in
the system even when not called, and one for the auxiliary "stair light"
service. Supplied with call volume adjustment on 3 levels and call mute.
The luminous indicators of: call signal mute, unanswered calls, services
not available and gate/door open, are by means of two LEDs (red and
green) present on the monitor.
The monitor can be installed as a wall-mounted version, by means of the
bracket (R682) supplied with the monitor, or desktop version by means
of the conversion kit type 661A or 661F.
Connection and connector terminal board
3, 4)
Additional ringtone connection
1, 2)
BUS line.
12 +, 13 -)Additional power supply for monitor with power supply type 6923.
V3, M)
Connection for door call pushbutton.
CN1)
Connection for monitor.
ELVOX
CS2350
271103
4
3
2
1
1 2 1 3 V 3 M
C
+ -
B
A
Video signal
Stabilizzazione
For monitor
stabilization
Per monitor
segnale video
Monitor technical specifications
- Wall-mounted monitor in ABS
- Backing plate and plugs for wall-mounted fixture or 3-module box.
- 4" flat screen.
- Electronic circuit on interchangeable cards.
- Standard video signal CCIR 625 lines 50 squares
- video pass band 4 MHz
- Operating temperature from 0° to +40° C.
- Electronic ringtone.
- Input for door calls with different ringtone from panel calls.
- Output for additional ringtone type 860A.
- Supply of data from bus.
- Input for additional power supply (type 6923) if the system is configu-
red to enable simultaneous activation of more than two monitors.
Controls and adjustments (Fig. 2 - 3)
A - Ringtone volume and mute control.
B - Brightness control.
C - Contrast control.
D - Lock release pushbutton
E - System self-start pushbutton
F - Pushbutton
for auxiliary service, 1st relay of 1st actuator type
692R.
When the pushbuttons
second auxiliary service is activated, 2nd relay of 1st actuator type
692R.
G - RESET pushbutton for monitor programming.
H - Ringtone mute LED. The fixed light illuminates when the ringtone
mute is enabled by means of slider "A" and flashes when calls have
been denied.
I -
Door open LED. On systems in which this function is used, the LED
remains lit permanently when the door/gate is open.
Press to return to index
Press to return to index
I N T R O D U C T I O N / I N S T A L L A T I O N
Fig. 1
CN1
.
.
and
are pressed together, a
H
D
F
I
E
Fig. 3
C
G
INSTALLATION
- Install the monitor away from sources of light and heat.
- Fig. 1 - Fix the monitor mounting plate to the wall with a distance of
about 1.4 m between the bottom edge and the ground (Fig 4).
- Make the connections on the monitor terminal block.
- Fit the monitor following the direction of arrows 1 and 2 (Fig. 5).
1,40
Fig. 2
B
A
Fig. 4
Fig. 5
1
1
1
1
2
2
5
Tabla de contenido
loading

Este manual también es adecuado para:

6309

Tabla de contenido