Tabla de contenido
Idiomas disponibles
Idiomas disponibles
2. Apply PTFE tape tightly on the mounting nut threads.
a. Before you start, clean the threads with a cloth.
b. To make sure you wrap the tape in the correct direction, hold the transmitter so that
the product label is facing you and the mounting nut points away from you.
c. Start wrapping counter-clockwise from the second thread on the tip of the mounting
nut.
d. Wrap each round very tightly about half way on top of the previous round so that the
tape overlaps. Stretch the tape for optimal tightness. Apply a couple of rounds of
tape.
PTFE
Chapter – Installation
11
Tabla de contenido
