Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Troubleshooting
Symptom
Hot Keys do not get a
response under OSD
Pressing the Hot Keys does
not get a response
Mouse is not responding
Port LED's 1-4 flash
repeatedly.
Specifications
Power Consumption
PC Connections
Direct
Max. (via Daisy Chain)
Port Selection
Power
LED's
On Line
Selected
Console
Connectors
CPU Ports
Daisy Chain Ports
Scan Interval (OSD Selection)
Operating Temperature
Storage Temperature
Humidity
Enclosure
Weight
Dimensions
Possible Cause
Action
DIP Switch settings
Make sure that DIP Switch 6 is set to ON.
The connection from
Check the Online LED for the selected port. If it is not lit,:
the selected port to the
1. Manually press one of the Select switches to connect to a
target PC has been
broken or the PC is
2. Check the cables to make sure all are properly
turned OFF.
3. If the desired PC is OFF, power it ON.
Reset the keyboard and mouse by simultaneously pressing
Improper keyboard
and holding the Select Switches 1 and 2 on the First Stage
reset
KVM unit for three seconds. Do as often as necessary.
Unplug the keyboard connector from the Console
Keyboard Port, then plug it back in.
Turn off all PCs connected to the switch. Wait five seconds
Improper KVM switch
before turning them back on. Note: If a PC uses a mouse
reset
protocol sensitive operating system (such as NT), it may be
necessary to restart it after turning the units back on.
Incorrect keying in the
1. Be sure to release both the [Ctrl] keys simultaneously.
Port ID.
2. After the [Ctrl] + [Ctrl] combination, be sure to key in
Reset the keyboard and mouse by simultaneously pressing
Improper mouse reset.
and holding the Select Switches 1 and 2 on the First Stage
KVM unit for three seconds. Do as often as necessary.
Power On Self Test
See Installation section for more information.
problem
DC9V 600mA
8
256
Front Panel Switches
Hot Keys
On Screen Display (OSD)
1
8
8
1 x mini-DIN 6 Female (PS/2 Style Mouse)
1 x mini-DIN 6 Female (PS/2 Style Keyboard)
1 HDDB15 Female (standard VGA/SVGA)
2 x 3.5mm Earphone Jacks (Mic and Speaker)
8 x DB25 Female
DB25 Female (Daisy Chain In), DB25 Male (Daisy Chain Out)
3, 5, 10, 15, 20, 30, 40, 60 seconds
41 – 104
-4 – 140
0 – 80%RH, Noncondensing
Metal
6.25 lbs
18" x 6" x 1¾" (19" 1U)
PC that is powered ON.
connected.
the Port ID and press [Enter] within 6 seconds.
F
F
Tabla de contenido
