VISIOMED TensioFlash Manual De Usuario página 13

PROBLEM POSSIBLE CAUSE
No battery inserted
Nothing is
displayed when The batteries are used
the START/STOP
The batteries are not placed in the correct polarity
button is pressed
direction
The cuff position was not correct or it was not properly
tightened
The body posture was not correct during the
Screen displays
measurement
abnormal results
You moved during the measurement or you were not
sufficiently relaxed.
Measurement
error
Blood pressure measurement impossible
(the screen
displays EE)
24 Visiomed - KD-595 - Manuel d'utilisation - 072017
SOLUTION
Insert batteries
Insert new batteries
Observe battery polarity
Apply the cuff correctly and try again
Review the suggestions before measurement
Do not move during the measurement. Relax
for 10 minutes before taking your blood
pressure.
Press the START button in order to restart the
measurement.
Check the position of the cuff on the wrist.
Check the position of the body during the
measurement.
Do not speak or move during the reading.
HANDLEIDING
0197
KD-595
Visiomed - KD-595 - Manuel d'utilisation - 072017
NL
25