Parts And Components; Before Use; Cleaning And Maintenance - cecotec CONGA ROCKSTAR 200 VITAL ERGOFLEX Manual Del Usuario

Ocultar thumbs Ver también para CONGA ROCKSTAR 200 VITAL ERGOFLEX:
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 14
ENGLISH

1. PARTS AND COMPONENTS

Fig. 1
Dust tank
1.
Vacuuming tube release button
2.
Flex vacuuming tube
3.
Suction base with brush
4.
Power switch
5.
Handle and battery
6.
Speed selector
7.
Suction base release button
8.
Charging base
Fig. 2
Charging base
1.
Power adapter
2.
Wall bracket
3.
2-in-1 accessory
4.
Brush for furniture
5.
Jalisco brush
6.
Multifunctional brush made of silicone and bristles
7.

2. BEFORE USE

Take the product out of the box.
Check for any visible damage, if any is observed, contact as soon as possible the Technical
Support Service of Cecotec for advice or reparation.
3. OPERATION
Product assembly
Note: The product includes 2 screws to assemble the wall bracket.
Install the battery in the vacuum cleaner's main body by aligning it with the guides on the main
body and sliding it down.
Introduce the vacuuming tube in the main body until a click is heard, indicating it is properly
fixed.
30
CONGA ROCKSTAR 200 VITAL ERGOFLEX
Use the Flex Tube to vacuum the most difficult dirt. Press the Flex button to bend the tube.
Attach the suction base with the brush to the other end of the vacuuming tube.
Select the desired brush you want to use depending on the surface to clean, the Jalisco brush
or the multifunctional brush.
Jalisco brush is especially designed to clean hard floors, but can be used efficiently to clean
any type of surface, such as soft floors.
The multifunctional brush made of silicone and bristles is ideal for cleaning carpets and pet
hair.
To change the brush, press the side brush release button, remove the one in use and introduce
the new one.
Use the power switch on the handle to turn the device on or off.
Press the trigger on the handle to activate the desired power level.
Handheld vacuum cleaner
Select the desired accessory according to the area or object that is going to be cleaned and
insert it directly in the main body.
Dust tank
Rotate the dust tank and remove it from the main body.
Battery charging
The battery indicator will turn on red when battery is low. When this happens, connect the
power adapter to the battery and to the power supply.

4. CLEANING AND MAINTENANCE

Do not use abrasive scouring pads, powders or cleaners to clean the product.
Use a soft, dampened and clean cloth to clean the product's outer housing.
Do not let water enter into the vacuum cleaner.
Keep the appliance in a cool, dry place and out of reach from children.
Do not immerse the device in water and do not clean any of its parts in the dishwasher.
Filter maintenance
Rotate the dust tank and remove it from the main body.
Take out the mesh filter, the sponge filter and filter case.
Wash all the filters and the case.
Dry the mesh filter, sponge filter and filter case carefully one by one before assembling them
back.
Note: All filters can be washed with warm water, do not use detergents.
ENGLISH
31
CONGA ROCKSTAR 200 VITAL ERGOFLEX
Tabla de contenido
loading

Tabla de contenido