Water Resistance - Emporio Armani AR2434 Manual De Instrucciones

PIN LINK dIAGRAM
PIN PUSHER
ARROWS
Link Removal
To remove a link from a pin link bracelet, you will need the bracelet
holder, pin pusher, and chain nose pliers (see pin link diagram).
1. Open the clasp on the bracelet.
2. Look on the inside of the bracelet and locate the arrows near the
clasp (see diagram).
3. Place the band into the appropriate size slot of the bracelet holder
with the arrows pointing down (see diagram).
4. Center the desired pin to be removed over one of the holes in the
bottom of the bracelet holder.
5. With the pin pusher, push the pin, as far as possible, through the link.
6. Remove the watch from the bracelet holder and simply finish
pulling out the pin with the chain nose pliers.
NOTE: Two pins hold each link in place and must be taken out before
a link can be removed. Please note that the pins are partially split
down the center.
40
CHAIN NOSE PLIERS
BRACELET HOLDER
WATeR
ReSISTANCe
Caseback
Depth
Marking
Washing
Hands
— —
WR —
3 Bar,
3 ATM
30 Meters
5 Bar,
5 ATM
50 Meters
10 Bar,
10 ATM
100 Meters
20 Bar,
20 ATM 200
Meters
30 Bar,
30 ATM 300
Meters
50 Bar,
50 ATM 500
Meters
Always set the crown in closed position (the normal position).
Tighten screw-lock crown completely.
WATeR-ReLATed USe
Showering, Swimming, Scuba
Bathing Snorkeling Diving
41