Emporio Armani AR2434 Manual De Instrucciones página 19

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 43
CHRONOGRAPH dUAL-TIMe
CENTER STOP-SECOND
HOUR HAND
MINUTE COUNTER
SECOND TIME ZONE
Time and date Setting
1. Pull crown out to position 2 and turn clockwise to set date to
the previous day.
2. Pull crown out to position 3 and turn clockwise until the
present date is displayed. Continue turning crown to set the
correct a.m./p.m. time.
3. Return crown to position 1.
NOTE: To ensure accuracy, do not set the date between 9:00
p.m. and 12:00 a.m.
Second Time zone Setting
Before setting the second time zone, please ensure that the
chronograph is stopped.
1. Press B for 2 seconds until the second time zone minute hand
advances one minute. Time setting mode is activated.
2. Press B for less than one second to advance minute hand by
one increment.
3. Press B for 1-2 seconds to advance hour hand by one
increment; press and hold B for more than 2 seconds for hour
hand fast advance.
NOTE: If pusher is not pressed for 10 seconds, time setting
mode is deactivated.
36
MINUTE HAND
A
SECOND HAND
CROWN
1 2 3
B
DATE
Chronograph functions
Before using the chronograph, please ensure that:
• The crown is in position 1.
• The two chronograph hands are precisely at zero (12:00) position
after pressing B. Should this not be the case, the positions of
the hands must be adjusted. Please refer to the section titled
"Adjusting the Chronograph Hands to Zero Position."
basic function
1. Press A to start/stop the chronograph.
2. Press B to reset to zero.
Interval Timing
1. Press B while the chronograph is running to measure intervals
(timing continues in the background).
2. Press B again to display ongoing measured time.
3. Repeat steps 1 and 2 to measure additional intervals.
4. Press A to finalize timing.
5. Press B to reset to zero.
Adjusting the Chronograph Hands to zero Position
If one or both chronograph hands are not in their correct zero (12:00)
positions after pressing B (for example, following a battery change):
1. Pull crown out to position 3.
2. Press A and B simultaneously for at least 2 seconds until center
stop-second hand rotates by 360°. Corrective mode is activated.
3. To adjust center stop-second hand, press A to move hand one
increment; press and hold A for fast advance.
4. Press B to advance to minute hand. Press A to move hand one
increment; press and hold A for fast advance.
5. Return crown to position 1.
37

Hide quick links:

Tabla de contenido
loading

Tabla de contenido