Tabla de contenido
12
9
A
10
11
A
B
C
C
B
D
Fitting and removing your baby
from the Simplicity Infant Carrier
Operating the harness
Your child must be fastened
in the safety harness at all
times when using the Simplicity
Infant Carrier.
9
Place the Simplicity on a level
floor surface and the handle in
the stable position.
Slacken the shoulder straps by
pressing the harness release
button (A) and at the same time,
pulling both shoulder straps
forward below the chest pads
with your other hand (B).
Unfasten the harness by pressing
the red release button (C)
10
Place the shoulder straps over
the sides of the infant carrier.
Place your baby in the Simplicity
Infant Carrier and check that the
shoulder straps are in the correct
position for your baby's
shoulders (see point
Correctly position the 5 point
harness over the child
making sure there are no twists.
11
Fit the shoulder strap tongues
(A) and (B) together and then
push firmly into the crotch strap
buckle (C) until you hear a click.
5
p.10).
Tabla de contenido
