Tabla de contenido
6
A
7
8
B
C
Harness adjustment
Place the Simplicity Infant Carrier on
a level floor surface with the handle
in the stable position.
6
Slacken the shoulder straps by
pressing the harness release
button (A) at the same time,
pulling both shoulder straps
forward below the chest pads
with your other hand (B).
Press the red release button (C)
and undo the harness.
Carefully place your baby in the
Simplicity Infant Carrier and
identify the correct shoulder
position.
7
Open the instruction manual
compartment at the rear of the
infant carrier shell and locate the
adjustment handle.
8
Release the handle and adjust
the shoulder straps to the
required position. Push the
handle back into the new
position and make sure it
clicks correctly into the notched
groove. Close the instruction
manual compartment lid. The
inner head support will have
altered position so that it
corresponds with the new
harness shoulder position.
Check that the shoulder straps
are in the correct position for
your baby's shoulders.
11
Tabla de contenido
