Before First Use - TEFAL MAGIC TEA BJ1100FR Manual De Instrucciones

• For your safety, only use the
manufacturer's accessories and
spare parts designed for your
appliance.
• Do not pull on the cord to unplug
the appliance.
• Never put your teapot in a micro-
wave oven, on a flame or on elec-
tric cooking plates.
• Do not fill the appliance with
water if it is still hot.
• All appliances are subject to
strict quality control procedures.
These include actual usage tests
on randomly selected appliances,
which would explain any traces
of use.
• Do not use the jug without the lid.
DESCRIPTION
1 - Self-locking removable lid
2 - Spout
3 - Handle
4 - Glass pot
5 - Water level
6 - Brewing basket
7 - Start button
8 - Manual stop button
9 - Bottom heating assembly
10 - Power supply base

BEFORE FIRST USE

- Remove all packaging, labels or accessories
on the inside and outside of the product.
- Set the length of the power supply cord by
winding it under the base. Push the cord
into the slot.
- Operate your appliance as follows:
- fill with water up to the maximum level
- start by pressing button (7) and wait for the
appliance to automatically stop.
- rinse.
• Handle the teapot with care as glass is
fragile.
• Avoid thermal shocks: do not splash or
fill with cold water when the appliance
is still hot.
INSTRuCTIONS FOR uSE
- Remove the lid unit + brewing basket (Fig
2a), by squeezing in the buttons on the lid.
- Fill the teapot with the desired quantity of
water
• Never fill the teapot above the maximum
water level, nor below the minimum level.
- Detach the brewing basket (6) from the lid
(1) by applying pressure to the lid then tur-
ning it slightly, and release.
- Place the tea or herbal tea in the brewing
basket (6). Remove the cardboard label
from bags.
Proportion to taste and in relation to the
quality of the tea. As an indication, for 1 litre
of water we recommend 1 bag/1 spoonful of
tea for a light drink, 2 bags/2 spoonfuls for a
fairly strong drink, 3 bags/3 spoonfuls of tea
for a strong drink.
- Replace the lid by placing it on the brewing
basket and inserting the lips on the rim of
the basket in the grooves of the lid, press
and turn slightly, then release.
- Squeeze the buttons on the lid and position
the whole unit in the pot (brewing basket
and rod), taking care to ensure that the
washer at the bottom of the rod is correctly
centred in the hole. (Fig 2b)
IMPORTANT: NEVER attempt to position the
brewing basket first and then the lid on the
teapot as you are likely to damage the plas-
tic parts. Carefully follow the instructions.
- Release the buttons on the lid to lock it
automatically to the pot.
- Start up the teapot by pressing switch "7".
- The water will be sucked in and heated
before going up in the pump and sprinkling
the tea leaves and running out through the
brewing basket (Fig 3).
10 10