General Description - GYS ENERGY STATION Manual De Instrucciones

Translation of the original instructions

GENERAL DESCRIPTION

Energy Station is an autonomous starter designed to start vehicles with a 12V or 24V battery. The trolley enables to
place 1 or 2 12V batteries (6 2V cells) for a capacity up to 180Ah each. The machine integrates 2 automatic batte-
ry chargers to charge the internal and external batteries and a battery tester. In starter mode, the electronic of the
vehicle is protected against overvoltage.
ASSEMBLY
Trolley
Fastenings : 4 screws, 8 M5x12 screws, 2 M6x50 screws, 30 M8x12 screws, 30 M8 nuts.
Tools necessary for the assembly (not provided): 1 set of Allen keys, 1 wrench of 10 and 8, 1 screwdriver with screw-
driver bit torx T20 (for the handle)
1
M8 x12
4
Vis
tôle
M6
x50
Internal batteries and charging clamps
23 cm
43 cm
ENERGY STATION
2
M8 x12
M5
x12
Vis
tôle
Before any use, instal both « internal batteries » (not provided) : 12V lead
batteries with liquid or gel electrolyte of a maximum capacity of 120 to 170 Ah
each. Their dimensions must not exceed 45x 53x23 cm, and 100 kg for the total
weight.
To install them:
• Unplug the power supply cable or place the charging switch on « 0 ».
• Fasten the 4 collars supplied on the 4 cables.
• Connect the batteries to the Energy Station respecting the polarities:
- Red cable to the battery +
- Black cable to the battery –
3
5
EN
M5
x12
13