Tabla de contenido
Idiomas disponibles
Idiomas disponibles
CHARGING TRIMMER
This battery charger is intended for use with Andis model CLT trimmer.
Remove the trimmer and AC/DC adapter from the carton. Plug the adapter
into an electrical outlet according to your local power standards (Figure G).
Confirm the voltage available at each overseas location before using the
appliance.
The trimmer must be OFF for the battery to charge. Place the trimmer in
charging stand and plug adaptor cord into receptacle on back of stand.
You may also plug the adapter cord plug directly into the bottom of the
trimmer. The trimmer has a lithium-ion battery that cannot be damaged by
overcharging. We recommend that the trimmer be unplugged if not in use
for seven or more days.
TRIMMER INDICATOR LIGHTS
See the chart for charging status and corresponding trimmer lights.
Trimmer In Use
100-30% Charged
30-10% Charged
10-0% Charged
Trimmer Charging
Charging
Charging Complete
TRIMMER INDICATOR LIGHT STATUS
Indicator Light Status
Green High Battery Indicator BLINKS
Green Low Battery Indicator ON
Red Charge Battery Indicator OFF
Green High Battery Indicator OFF
Green Low Battery BLINKS
Red Charge Battery Indicator OFF
Green High Battery Indicator OFF
Green Low Battery Indicator OFF
Red Charge Battery Indicator BLINKS - trimmer will shut off within 10 minutes
Indicator Light Status
Red Charge Battery Indicator ON
Green Low Battery Indicator BLINKS, then remains ON
Green High Battery Indicator BLINKS
Green High Battery Indicator ON
Green Low Battery Indicator ON
Red Charge Battery Indicator OFF
7
Tabla de contenido
