Andis CLT Instrucciones De Uso Y Cuidado página 6

16. This appliance is only to be used with the
power supply unit provided with the appliance.
17. WARNING: Cutting blades may become hot
after prolonged use. Oil blades frequently.
18. Keep the appliance dry.
19. Cleaning and user maintenance shall not be
made by children without supervision.
20. For trimming purposes only.
SAVE THESE INSTRUCTIONS
OPERATING INSTRUCTIONS
• The battery is not intended to be replaced by the user.
• The battery must be removed from the appliance before it is scrapped.
• The appliance must be disconnected from the supply mains when
removing the battery.
• The battery is to be disposed of safely.
Before starting your trimmer, it must be pre-charged fully before using it for
the first time. To start trimmer, slide the power switch up; to stop, slide
switch back to original position.
POWER SUPPLY
This unit is equipped with a universal AC/DC power adapter/battery charger
(Figure A).
1. Remove the power adapter and charger from the carton.
2. Note the charger comes standard with a universal AC voltage power
adapter and three interchangeable plugs (Figures A-D).
3. To attach the desired plug to the power adapter, place the tabs on the
plug inside the slots on the power adapter and slide plug down until it
"clicks" into place. To remove, press the semi-circular button on the
power adapter and slide the plug off. The plugs for the various countries
all attach and remove using the same method (Figures E & F).
4. Connect the power cord to the back of the trimmer and then insert the
power adapter into an AC outlet.
6