Operational Procedures; Activation; Operation; Recipe - Skymsen BS2 Manual Del Usuario

01
02
03
17
10
04
12
11
01 – Mixing Rod
02 – Coupling assembly
03 – Cup Coupling
04 – Motor Base
05 – Reset
06 – Central Cutting Unit
with Knife
07 – Cup
08 – Lid
FEATURES UNIT
Voltage V
Frequency Hz
Nominal Power W
Power Rating HP
Height mm
Width mm
Depth mm
Net Weight kg
Gross Weight kg

4. OPERATIONAL PROCEDURES

4.1 Activation

• Make sure that the Equipment is firm and stable on the
working station.
• Connect the Equipment to the electrical power supply.
• To activate the Equipment press the ON/OFF button N°10,
placed in the frontal display located at the motor base N°03.

4.2 Operation

• NEVER turn the equipment ON without ingredients inside
the cup.
• NEVER try to take the cup out or replace the cup when the
motor is running.
• Remove all liquids from the Cup coupling Nº 05 before
05
09 – Overlid
10 – ON/OFF Button
11 – 35 seconds Button
12 – 60 seconds Button
13 – 90 seconds Button
14 – PULSE Button
15 – HIGH Speed Button
16 – MEDIUM Speed Button
17 – LOW Speed Button
BS2
127 220-240
50-60 50-60
1050 1200
3 3
510 510
205 205
230 230
5.5 5.5
6.5 6.5
the Equipment is turned ON. Any presence of liquids in this
space can cause damage to the motor.
09
• Make sure that the Cup's shaft is completely assembled
on the Coupling Assembly Nº 02 and that the knife Nº 06 is
08
firmly assembled on the shaft.
• This blender works with high speeds. The processing times
are much faster than in other types of blenders, therefore,
07
this equipment cannot be used for a long period of time
without a pause otherwise overheating of components and
06
damage may occur.
• If the recipe is blended but not completely homogenized,
16
press the PULSE button for extra blending or select an
automatic blending cycle of higher time.
• Liquid must always be placed in the cup when the objective
of the Processing is to crush ice.
15
• Manual operation: Select the HIGH, MED or LOW buttons
in accordance with the ingredients and recipe you want to
14
process. These buttons have pre-programmed speeds that
will run continuously until you press the selected button
13
again to stop it. Alternatively, you can also use the PULSE
button.
• Automatic Cycle Operation: Select 30 seconds, 60 seconds
or 90 seconds to prepare your recipes. These selections
present a mix of speed, starting from a low to higher
rotation, for the selected amount of time. When the time
is done, the machine turns off automatically. This feature is
ideal for quick recipes and/or cold beverages.
• When you select an automatic cycle operation time
button, a red led will light up and a sound BIP will be given
when the cycle stops.
To turn off the blender at any time press any key.

4.3 Recipe

-800 g of carrot with 1200 ml of water.
-2 minutes on and 1 minute off.

5. CLEANING

Remove the plug from the socket before starting the
cleaning process.
Equipment must be thoroughly cleaned and sanitized:
- Before being used for the first time;
- After the operation of each day;
- When not in use for an extended period;
- Before you put it into operation after prolonged downtime.
Some parts of the equipment may be removed for cleaning:
-Cup
-Cover
Cleaning Instructions:
- To wash the inside of the glass, fill the glass to half
its capacity with water and add a small dose of neutral
detergent.
- Put on the lid and turn on the blender for 30 seconds.
- The very own stirring of the water and detergent mixture
provides the cleaning of the blade.
- Remove contents and rinse the Cup.
- If necessary use a brush with handle and nylon bristles to
assist in the removal of materials impregnated in it.