Technical Data - Toya POWER UP 73202 Manual De Instrucciones

PROPERTIES OF THE DEVICE
Thanks to the IGBT electronic elements, the inverter welder permits to realise welding at the lowest possible energy consumption
and maximum efficiency. The welder may be used with most types of electrodes available in the market, for example regular,
rutile or cellulose ones. The welder may be used with electrodes designed for welding of stainless steel, steel alloys as well as
non-ferrous metals. The welder has been designed for household purposes and it must not be used for lucrative jobs or in crafts.
A correct, reliable and safe operation of the tool depends on its correct use, so:
Read the operating manual thoroughly before work and keep it for future reference.
The supplier shall not be held responsible for any damage occurred as a result of failure to observe safety regulations and indica-
tions contained in this manual.
ACCESSORIES
The welder is supplied completely assembled and apart from connection of welding cables no assembly is required. Along with
the welder welding cables are supplied. The welder is supplied without welding electrodes.

TECHNICAL DATA

Parameter
Catalogue number
Weight
Dimensions
Power supply voltage
Nominal frequency
Maximum welding current
Diameter of the electrode
Protection grade
Insulation class
EMC classification (according to IEC 60974-10)
EXPLANATIONS OF THE SYMBOLS
Rating plate
1
2
4
6 8
7 9
14
22
1. Name and address of the manufacturer, trademark
2. Catalogue number
3. Serial number
4. Symbol of the type of welder: single-phase static inverter – transformer – rectifier
5. Reference to the standard, whose requirements the welder complies with
6. Symbol of the type of welding: manual welding with shielded electrodes
7. Symbol of welders which may be used in an environment of an increased risk of electric shock
8. Symbol of the welding current: direct current
9. Nominal voltage without load: peak value
10. Range of output parameters: minimum welding current and the corresponding conventional value of the load voltage – maxi-
mum welding current and the corresponding conventional value of the load voltage
11, 11a, 11b. Symbol of the working cycle: percentage of the working cycle at the ambient temperature of 40°C.
12, 12a, 12b. Symbol of the nominal welding current: values of the nominal welding current
13, 13a, 13b. Symbol of the conventional load voltage: values of the conventional load voltage
O R I G I N A L
Unit of measurements
[kg]
[mm]
[V a.c.]
[Hz]
[A d.c.]
[mm]
10
11
12
13
15
GB
73202
5,6
320 x 200 x 145
230
50
180
1,6 – 5,0
IP21S
I
B
3
5
11a
12a
13a
16
24
I N S T R U C T I O N S
Value
73203
5,6
320 x 200 x 145
230
50
200
1,6 – 5,0
IP21S
I
B
11b
12b
13b
17
13