Tool it PBT 60 Manual De Instrucciones página 6

PBT 600 – Battery Conductance Testeur
3. Tester Startup
PBT 600－ Connecting the test clamp with the battery, then press power key.
The real time capacity of
the internal 9V battery
4. Hidden function
PBT 600: Press Return Key to start quick test.
Voltage
5. IN-VEHICLE or OUT-OF-VEHICLE
After starting up, the battery will prompt to select batter location. Press UP/DOWN key to
select in-vehicle or out-of-vehicle, then press OK key to confirm.
● When surface charge detected by the tester, it prompts "SURFACE
CHARGE, TURN LIGHTS ON".
●Turn lights on as prompted to eliminate battery surface charge,
tester will then display the following messages as right images.
● Now the tester detects the surface charge has been eliminated,
turn lights off as prompted, then press OK key. The tester will
recover automatic test.
6. Select Battery Charge State
Press UP/DOWN key to select battery charge status Before Charge or After Charge, then
press OK key to confirm. This way can ensures a more accurate test result.
NOTE: In Vehicle, select Before Charge for cold vehicle and After Charge for hot
vehicle.
Conductance Value
CCA Value
Internal Resistance
UK - 6
Voltmeter value, measure
range is 1.0-30vdc