Tabla de contenido
Idiomas disponibles
Idiomas disponibles
PROPERTIES OF THE PRODUCT
The multifunction combustion trimmer has been designed for domestic tasks. Thanks to interchangeable modules, the device
may be applied in a wide range of operations. The purpose of the trimmer module is exclusively decorative trimming of grass in
areas which are not accessible for conventional grass mowers, eg. close to building walls, fences, around trees and bushes, along
paths, around lawns, etc. Mowing is realised with a pair of rotating nylon lines. The device must not be used instead of a grass
mower to mow larger lawns. Trim bushes, lignified sprouts, etc. with the cutting blade. The garden chain sawing machine module
has been designed for decorative cutting of small diameter branches in places which are not accessible for a regular chain saw-
ing machine. It is prohibited to cut entire trees and logs and to execute other woodcutting tasks, which are more safely realised
with a regular timber sawing machine. The purpose of the hedge shears module is decorative shaping of hedges, particularly in
areas which are not accessible for regular shears. The device has been designed solely for household tasks and it must not be
used professionally, i.e. in plants and for lucrative purposes. A correct, reliable and safe functioning of the device depends upon
its adequate operation, and therefore:
Before you proceed to use the tool, read the whole manual and keep it.
The supplier shall not be held responsible for any damage and injuries caused by operation of the tool other than intended, failure
to observe safety regulations and recommendations of this manual. Operating of the tool for purposes other than intended shall
also render the warranty void.
EQUIPMENT
The trimmer is supplied complete, but before the first use it requires assembly.
The device is supplied with the following modules:
- trimmer module with a cutting line reel and a cutting blade,
- garden chain sawing machine module,
- hedge shears.
TECHNICAL DATA
Parameter
Catalogue number
Motor
number of cylinders
number of strokes
cooling
Type of spark plug
Swept capacity of the motor
Motor power
Fuel consumption at the maximum motor power
Unitary fuel consumption at the maximum motor power
Fuel tank capacity
Rotational speed with the motor idling
Noise
acoustic pressure
L
power
wA
Vibration level
Weight
Cutting width - cutting line
Diameter of the cutting line
Length of the cutting line on the reel
Cutting width - cutting edge
Thickness of the cutting blade
Diameter of the cutting blade fixing system
Maximum recommended rotational speed of the motor (cutting line / blade)
Maximum rotational speed of the spindle (cutting line / blade)
Weight
Capacity of the chain lubricating oil tank
Cutting length
O R I G I N A L
GB
Unit of measurement
Trimmer module
Module of the garden chain sawing machine
I N S T R U C T I O N S
[cm
]
3
[kW]
[kg/h]
[g/kWh]
[l / cm
]
3
[min
-1
]
[dB (A)]
[dB (A)]
[m/s
]
2
[kg]
[mm]
[mm]
[m]
[mm]
[mm]
[mm]
[min
-1
]
[min
-1
]
[kg]
[cm
3
]
[cm]
Value
79755
SK1E36F-2B
1
2
Air
L8RTC, BM6A
32,6
0,9
0,509
672
0,9 / 900
3000
92 ± 3,0
103 ± 3,0
5,0 ± 1,5
7,2
430
2,4
5
255
1,4
25,4
8000 / 9800
6200 / 7800
7,1
125
25,4
19
Tabla de contenido
