Ugur USD 1045 BK Manual De Instrucciones página 19

A- THINGS THAT MUST BE DONE BEFORE USING YOUR DEEP
FREEZER
WARNING!
• Do not place your deep freezer to a place exposed to direct sunlight or influence area of the heat sources
such as stove, radiator core, oven, cooker, radiant and infrared. Otherwise, this may cause performance dec-
rease, damage of your freezer or make it become dysfunctional. (Picture 1)
• Your freezer is set for operating at mains power of 220-240 Volt 50 Hz. Using your freezer with a different
voltage may cause it become dysfunctional and fire. (Picture 2)
• Electrical installation must conform to national regulations. (Picture 3)
• There must absolutely be a residual current relay and a fuse in your electrical installation for preventing the
risks of electrical shock and fire. (Picture 4)
• Our company is not responsible for the failures and material damages that may occur in case of using wit-
hout grounding. (Picture 5)
• Place the freezer in a damp-free place with unobstructed air circulation.
• You must clean inside your product before the first use. (see page 26)
• After placing your freezer to its place, wait for one (1) hour without moving it before starting using.
• If your freezer is installed under very cold weather conditions, then the waiting period must be at least two
(2) hours before starting to operate it.
• Pack your foodstuff air-tight before placing them into the freezer for preventing them losing their tastes and
not getting dry. (Picture 6)
• In case of prolonged blackouts, do not open the door of your products for preventing heat loss. If you do not
use your freezer or leave it empty for a short time, do not unplug it for saving energy. Otherwise, more energy
will be consumed for re-cooling your freezer.
• Locations of the lamps may change depending on your freezer's model. You can place you foodstuff into
your freezer two (2) hours after the red temperature light goes out. For more cooling, your product is equ-
ipped with super cooling system. It is required to run super cooling function of your device during the first
EN
operation (for the models with super cooling option)
• Super cooling system will run for maximum 24 hours continuously. Otherwise service life our your freezer
may decrease (For models with super cooling)
PICTURE 1
PICTURE 4
PICTURE 2 PICTURE 3
PICTURE 5 PICTURE 6
36
A- THINGS THAT MUST BE DONE BEFORE USING YOUR DEEP
FREEZER
WARNING!
• In products, the doors of which are left opened or opened and closed continuously, frost deposit will inc-
rease and no cooling operation will be carried out. Thus open the doors only when needed. Make sure that
the doors are closed if not required.
• Unplug your product in case of sudden blackouts. For starting again, plug in your product 20 minutes after
the electricity is supplied. High voltage occurring at the moment of electricity supply may cause damage
of your product and fire.
• Do not allow wild animals and pets to enter into your product or walk around it. It may damage your freezer
or cause death and injury of the animals. Furthermore, wild animals and pets may cause fire by giving harm
to the electrical installation.
• Your product does not have any sterilizing effect on the microorganisms. Therefore it is necessary that the
foodstuff you place into your product must conform to the hygiene conditions. Otherwise, microorganisms
reproducing in foodstuff may pose a threat for your health. (Picture 9)
• Making partial loading by loading the foodstuff to the loading basket first, then taking them to the lower
part and adding new foodstuff as they are cooled down, rather than filling your product with full capacity
once is a healthier freezing method. In full capacity loadings to be made at a time, cooling operation of your
freezer may not be efficient as there will not be sufficient cold air flow.
• Do not contact new foodstuff to the frozen ones.
• When you place packages, which are not packed, properly packed and cause leakages, liquid leaks from the
foodstuff may cause corrosion on the metal parts of your show case, gas leakage at the pipes, yellowing on
the plastic parts, cracks and disappearance of thee hygiene conditions, odour formation and reproduction
of the microorganisms that may pose a threat for your health.
• Place the foodstuff to be placed into your freezer after checking their expiry dates.
• Do not use your products in the freezer until their expiry dates. Defrost and use foodstuff with close expiry
dates. Otherwise they may cause poisoning.
• Never place hot foodstuff into your freezer for cooling or freezing purposes. Keep it under room tempera-
ture and cool in the refrigerator.
• Do not re-freeze foodstuff that were once frozen and defrosted. However you can freeze products again
after re-processing (cooking, frying etc.) them. Otherwise, they may cause poisoning.
• Do not use any object other than the plastic ice shaver supplied with your product for shaving the ice.
Otherwise, if you use sharp, pointed and metal objects, you may damage internal wall of your freezer. Furt-
hermore, this may lead to gas leakage.
• Do not ever pour water or any other liquid for defrosting; never clean with steam cleaning devices. It may
cause damage on your product or electric shock.
• Do not ever use a thermal source (electric heater, heater etc.) for accelerating defrosting. These heaters may
damage plastic parts of your freezer.
• The freezer you've purchased is designed and manufactured for freezing foodstuff (for foodstuff that are
capable of frozen storage and to be frozen for the first time) and storing frozen food only. Please do not use
for other purposes. Our company shall not be responsible from the damage on the products that are used
for purposes other than these.
PICTURE 7 PICTURE 8 PICTURE 9
37
EN