Brewing­coffee - Grundig KM 5260 Manual De Instrucciones

Ocultar thumbs Ver también para KM 5260:
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 47
OPERATION­______________________________
Preparation
Caution:
First time use: Run the appliance at least 4
7
times without adding coffee.
Please follow the steps 1 - 2 and 8 - 13 in the
7
"Brewing Coffee" section.
1­­
R emove all packaging and stickers and dis-
pose of them according to applicable legal
regulations.
2­­
B efore using the appliance for first time, clean
all parts which come into contact with water
carefully. Please see full details in the "Clean-
ing and Care" section.
3­­
M ake sure that the appliance is placed in an
upright position and on a stable, flat, clean,
dry, and non-slip surface.
Brewing­Coffee­
1­­
O pen the water tank cover
glass jug
to fill the water tank
G
required amount of water, but do not fill past
the "max" mark. The brewed amount of coffee
will be 10 % less than the filled water, because
it is absorbed by the coffee grounds and the fil-
ter. The scale on the glass jug is marked in cof-
fee cups, e.g. 4 = 4 cups. For the good coffee
taste it is suggested to operate the appliance
with at least 4 cups coffee serving.
Note
Use only clean, cold, and fresh drinking
7
water.
2­­
C lose the water tank cover
3­­
P ress the release button
holder.
4­­
O pen the swivel filter holder
out to the left.
5­­
T ake a suitable paper filter (1 x 4) and insert
the paper filter into the swivel filter
20 ENGLISH
and use the
A
with the
E
.
A
for swivel filter
B
by swinging it
C
.
C
Note
Use only one paper filter at each time. Make
7
sure that the paper filter does not bend or
fold.
6­­
F ill the filter with the desired amount of ground
coffee. To do this, you may use the supplied
measuring spoon
J
7­­
C lose the swivel filter holder
which insures that it is closed accurately.
8­­
P lace the glass jug
G
Caution:
If the swivel filter holder
7
the glass jug
is not placed accurately, the
G
drip - stop function will not function properly.
It could cause hot water or hot coffee to over-
flow.
9­­
C onnect the plug to the wall socket.
10
Turn the appliance on, by setting the On/Off
switch
to the "ON" position.
I
– The On/Off switch
brewing process begins.
Notes
The brewing process can be stopped at any
7
time by setting the On/Off switch
"OFF" position.
The appliance is equipped with a drip-stop
7
located underneath the swivel filter holder
and enables you to briefly remove the glass
jug
to pour coffee before the water has
G
finished running through the machine.
Caution
Make sure to place the glass jug
7
warming plate
quickly (max. 30 seconds).
H
Otherwise the brewed coffee from the filter
could overflow. If you want to use the glass
jug for more than 30 seconds, switch off the
appliance.
.
until it clicks,
C
on the warming plate
is not closed or
C
illuminates and the
I
to the
I
on the
G
.
H
F
C
Tabla de contenido
loading

Tabla de contenido