Tabla de contenido
Idiomas disponibles
Idiomas disponibles
English
SPECIFICATIONS
Operating pressure
Dimensions
Length × Height × Width
Weight
Magazine capacity
Air consumption
STAPLE SELECTION
● Be sure to use only the genuine HITACHI staples for the N3804AB3 (S). The use of any other staples can
result in tool malfunction and/or staple breakdown, leading to serious injuries.
Only staples shown in the Table below can be driven with this Stapler.
Finish staples 18 gauge
ACCESSORIES
● Accessories other than those shown below can lead to malfunction and resulting injuries.
STANDARD ACCESSORIES
1
10
WARNING
Dimensions of staples
.138"
(3.5mm)
WARNING
3
2
70 – 120 psi (4.9 – 8.3 bar 5 – 8.5 kgf/cm
10-11/32" × 9-1/4" × 2-3/8"
(263 mm × 235 mm × 60 mm)
2.3 lbs. (1.0 kg)
100 Staples
.025 ft
/cycle at 100 psi
3
(.73 ltr/cycle at 6.9 bar)
(.73 ltr/cycle at 7 kgf/cm
18 Gauge 1/4" Crown
Min.
.043"
(1.08mm)
1 Eye protection ..........................................................1
2 Nose cap (mounted on tool) .....................................2
3 Case .........................................................................1
)
2
)
2
Max.
Tabla de contenido
