Tabla de contenido
Idiomas disponibles
Idiomas disponibles
English
SPECIFICATIONS
Operating pressure
Dimensions
Length × Height × Width
Weight
Magazine capacity
Air consumption
STAPLE SELECTION
● Be sure to use only the genuine HITACHI staples for the N3804AB3. The use of
any other staples can result in tool malfunction and/or staple breakdown,
leading to serious injuries.
Only staples shown in the Table below can be driven with this Stapler.
Finish staples 18 gauge
ACCESSORIES
WARNING
Accessories other than those shown
below can lead to malfunction and
resulting injuries.
STANDARD ACCESSORIES
1
8
WARNING
Dimensions of staples
.138"
(3.5mm)
3
2
70 – 120 psi (4.9 – 8.3 bar 5 – 8.5 kgf/cm
10-11/32" × 9-1/4" × 2-3/8"
(263 mm × 235 mm × 60 mm)
2.3 lbs. (1.0 kg)
100 Staples
.025 ft
3
/cycle at 100 psi
(.73 ltr/cycle at 6.9 bar)
(.73 ltr/cycle at 7 kgf/cm
18 Gauge 1/4" Crown
Min.
.043"
(1.08mm)
1 Safety glasses
2 Nose cap (mounted on tool)
3 Case
2
)
2
)
Max.
1
2
1
Tabla de contenido
