Operating Range - WALTERSCHEID KU 5410 Serie Manual Del Usuario

1. OPERATING RANGE

TYPE APPROVALS:
1: ABG-NUMBER:
2: EG-NUMBERS:
3:
4:
Operating range:
All versions, except width 309, 322, 329, 335 and 389 (type approvals 1, 2 ,3):
Agricultural or forestry vehicles with an admissible D value up to 92,0 kN and an admissible vertical load of
2.000 daN, at speed 40km/h
Versions with width 311 and 314 (type approval 4):
Agricultural or forestry vehicles with an admissible D value up to 84,3 kN and an admissible vertical load of
2.000 daN, at speed 40km/h
If the valid national approval regulations of the respective country of use require additional official appro-
vals for using these parameters, such approvals must be applied for.
Trailer rings:
All versions are suitable for connection to trailer rings according to DIN 11026 (ISO 5692-2), DIN 11043, DIN
74054 (ISO 8755), DIN 74053 (ISO 1102) and DIN 9678 (ISO 5692-1).
The non-automatic trailer coupling is only appropriate for use in quick-adjust hitch frames, for example KU
355, F 4267 respectively e1-0108. Attention must be paid to the D value and the maximum vertical load of
the hitch frame in this context. The lower value applies in each case.
For use of the coupling above the PTO, attention should be paid to the vehicle manufacturer's data regard-
ing vertical loads.
NON AUTOMATIC TRAILER COUPLING
TYPE KU / IN 5410
F 4220 (KU5410D)
e1*2015/208*2015/208ND*00155 (KU5410)
e1*2009/144*2013/8*0026*05 (KU5410)
e1*89/173*2006/26*0427*00 (IN5410)
10