Tabla de contenido
English
Key activation
Water hardness
Resin liters
Programming- Engineer Mode
Option
20,0
Regeneration
1
Regeneration
1
Personalization
Press a key
Day
Time
Technician
Press "+" or "-" to change the key activation time
(from 0.0 to 120.0 in 5 second-steps).
If the key is set at "0.0", once it has touched the
sensor it will remain activated. Touch the sensor
again to deactivate.
If another value is set, for example "10.0", the
key will remain activated for 10 seconds after
the last operation.
After having performed the water hardness tests
press the "+" or "-" keys to set the value on the
display (from 0 to 50 in steps of 5).
N.B. If a 0 value of water hardness is set, the
message "Regenerate Resin" will be deactivated.
Take the data of the number of resin liters from
the softener and set it using the "+" or "-" keys.
Press one of the selection keys and with keys
"+" or "-" change the value meter increase "1" or
"2".
Rest the "technician key" on the sensor.
English
Tabla de contenido
