Maintenance And Cleaning; Technical Data - ANSMANN BASIC 4 PLUS Instrucciones De Manejo

OPERATION
plug in the charger to the mains. the charger starts automatically when one or
more cells are inserted into the charging slots. pull back the contact bridge (5)
and insert the cells to the bottom of the charging slot. always connect the cells in
the right direction for polarity (according to the symbols in the charging slots).
the cells do not have to be inserted simultaneously as the charging processes are
separate from each other. to prevent the cylindrical cells and the 9 v block from
overcharging please only charge empty cells. please note the charging times
in the table (6). the maximum charging time for empty cells can be calculated
with following formula:
1.4 (charging factor) x capacity (mah)
charging time (h) =
charge current (ma)
example:
Mignon aa 2000 mah
charging current for aa cells: 150 ma
1.4 x 2000 mah
= charing time: approx 18,5h
150 ma

MAINTENANCE AND CLEANING:

to clean the charger, disconnect it from the power adaptor. to ensure correct
function of the charger keep the charging contacts free from dust and dirt. please
only use a dry cloth.
ENVIRONMENT:
rechargeable batteries are not to be disposed of in domestic waste. used
batteries should be turned into a battery recycling collection depot. check with
your local municipal office.

TECHNICAL DATA:

charging current: Micro aaa: 50 ma; Mignon aa: 150 ma; 9v: 15 ma