Human Machine Interface (Hmi) - Bosch EPS 625 Manual Original

Fig. 7: Side view of the control cabinet
1 "Mains on" indicator
2 MGT illumination switch
3 Master switch
The master switch (Fig. 7, Pos. 3) and MGT illumination
switch (Fig. 7, Pos. 2) are located on the side of the
control cabinet.
i
The bushing (Fig. 18, Pos. 3) acts as a lead-through
for an additional 230 V AC power supply at the
switch cabinet. Customer service must be called
in for wiring up the 230 V AC power supply in the
switch cabinet. Do not alter the wiring in the switch
cabinet. Bosch cannot accept any liability for dam-
age resulting from inexpert workmanship.
Robert Bosch GmbH
Product description | EPS 625 | 51
3.5.7

Human Machine Interface (HMI)

1
1
2
Fig. 8: Human Machine Interface (HMI)
3
1 HMI display
2 Control keys
3 Input keys
The Human Machine Interface (HMI)
face for controlling the EPS 625. The following func-
tions can be performed via the HMI:
R
RPM setting and display
R
Stroke setting and countdown
R
Oil temperature setting and display
R
Error diagnostics
i
Refer to chapter 5.1 for the description of the con-
trol keys on the HMI.
R
The HMI can be connected to a PC via the USB port
for updating the software.
i
Contact Bosch customer service for enquiries about
software updates.
!
Do not press the keypad buttons with sharp objects
or with greased hands.
The following data is displayed on the HMI screen:
R
RPM
R
Number of strokes
R
Oil temperature
R
Direction of rotation of flywheel
R
Error code (if any)
The HMI can be turned and positioned conveniently
for viewing the display from either side of the EPS 625
(refer Fig. 31).
en
2 3
is the main inter-
|
1 689 988 258 2017-05-30